Download AMP and Configure an Omega, Ultra, and MaxColor Series System.
Overview
AMP (Advanced Matrix Programmer) configures Omega, Ultra, and MaxColor Series devices into an HDMI matrix switching system. It is the modern replacement for JADConfig and supports both standardized and custom (alternate) configurations.
If you were previously using JADConfig for Omega or Ultra systems, you can continue to maintain those systems with it. However, all new systems should be configured using AMP.
System Configuration Options
Standardized Configuration (Recommended)
AMP automatically configures both the managed switch and all Just Add Power Encoders and Decoders. This creates a fully integrated video matrix that can also use extra switch ports for standard network devices.
- Supports Omega, Ultra, and MaxColor Series devices.
- Uses supported switches from the Standardized Configuration Supported Switch List.
- Select Build & Expand to begin configuration.
- Supports up to 63 switches, 101 Encoders, and 3023 Decoders.
Alternate Configuration
AMP configures the Encoders and Decoders only. You are responsible for configuring the switch according to the required network design.
- Switch must meet the minimum requirements.
- Select Alternate Configuration from the bottom-left corner of AMP to begin.
- Supports up to 9,999 Encoders and an unlimited number of Decoders (depending on network design).
For help choosing between configurations, see Standard vs. Alternate Configuration.
Before You Begin
Plan your system using the resources below:
- Plan a MaxColor Series system
- Plan an Ultra Series system
- Plan an Omega Series system
- Compare MaxColor, Ultra, and Omega Series Devices
Download AMP
Download the latest version of AMP and access training materials below.